orange
飞秒掺镱激光器

Menlo orange 5058 02 3w

Specifications

先进的功能和优点

    • > 1 W,<75 fs,或 > 10W,<150fs
    • SHG 520 nm可选配
    • 高稳定性
    • 低的幅度和相位噪声
    • 重复频率50-250 MHz
    • 单一锁模状态
    • Menlo Figure 9®技术, 一键启动60秒内激光输出
  orange
orange HIGH POWER
orange HIGH POWER 10
中心波长 1040 nm ± 10 nm 1040 nm ± 10 nm 1040 nm ± 10nm
平均功率 >100 mW (@ 100 MHz) >1 W (@ 100 MHz) >10 W (@ 100 MHz)
脉冲能量 >1 nJ >10 nJ >100 nJ
脉冲宽度* 啁啾,1-4 ps, 支持可压缩 <150 fs <150 fs (<75 fs**) <200 fs (<75 fs**)
重复频率** 50 MHz 或100 MHz 100 MHz 50 MHz 或 100 MHz
重复频率不稳定度 恒温90小时内<1 ppm 恒温90小时内<1 ppm 恒温90小时内<1 ppm
输出口 光纤耦合 自由空间 自由空间
额外光纤耦合种子光源输出 端口数 1 (最多4,若选用MULTBRANCH) 1 (最多4,若选用MULTBRANCH) 1 (最多4,若选用MULTBRANCH)
偏振 线性保偏光纤 线性,p偏振 线性,p偏振
光束高度   120 mm 120 mm
第二谐波模块  SHG 520  
平均功率   >400 mW  
脉冲宽度*   <150 fs  
偏振   线性,p偏振  

*如需特定的平均功率,脉冲宽度和重复频率,欢迎咨询

**如需较短的脉冲宽度, 欢迎咨询。

Description

Menlo Systems公司的掺Yb飞秒光纤激光器可以提供平均输出功率大于10 W,且脉

宽<200 fs的超短光脉冲。基于公司独有的figure 9®设计使激光器能够重复和长

期稳定地运行。

在振荡器和放大器全部使用保偏光纤元件以保证激光器优良的稳定性和在低

噪声下运行。二次谐波产生单元是一个高效率,具有最优性能的模块。该激

光器免维护,可自行安装且一键输出。您可以参考我们提供的功能选项来定

制合适的激光器以满足您的应用需求。

tion.

Options

  • CHIRPED PULSES

    Product Code: CHIRPED PULSES

    Picosecond pulses for seeding applications

  • SYNC100 Repetition Rate Synchronization

    Product Code: SYNC100

    Tunable cavity length by high-bandwidth piezo-controlled synchronization

  • RRE-SYNCRO Repetition Rate Stabilization

    Product Code: RRE-SYNCRO

    Feedback electronics to phase lock pulses to an external clock (see product page for more details)

    All-in-one synchronization solution: laser and synchronization electronics all components from one supplier: full automation for hands off operation, integrated and tested for an immediate start. → best performance with more time for your experiments!

    Synchronization: Laser to reference

    Synchronization Laser ReferenceRelative Phase Noise between stabilized laser and 10 MHz reference:

    RMS Timing Jitter: <200 fs [0.1 Hz–500 kHz] or same as reference, whichever applies first

    Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 10 MHz]

     

    Synchronization: Laser to laser

    Synchronization Laser Laser

    Relative Phase Noise between two lasers in master-slave configuration

    RMS Timing Jitter down to <20 fs [0.1 Hz–500 kHz] for Menlo fs lasers as master/slave with small locking bandwidth

    Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 10 MHz]

     

     

  • VARIO User-Defined Repetition Rate

    Product Code: VARIO

    Factory-set value selectable in the 50-100 MHz range

  • MULTIBRANCH Additional Seed Ports

    Product Code: MULTIBRANCH

    Seeding of multiple amplifiers with optional subsequent frequency conversion to cover multiple wavelengths

  • SHG 520 Second Harmonic Generation

    Product Code: SHG 520

    Frequency doubling to 520 nm

Amplitude noise < 0.5% rms (over 24h)

MENLO_Orange_HP_output power 10 W_3w.jpg


 

Reproducibility. Identical and consistent laser performance

Starttest C Fiber 3w

Menlo Expert Andon Bano 2021
Andon Bano
Your direct line to our expert
a.bano@menlosystems.com

Data sheets

Ordering information

  • Product Code
  • orange

Headquarters
sales@menlosystems.com
+49 89 189166 0

Menlo Systems, Inc.
ussales@menlosystems.com
+1 973 300 4490

Feedback? Click here