C-Fiber 780
Femtosecond Erbium Laser

Menlo_Systems_Femtosecond_Fiber_Laser_C Fiber 780_2018 05 08_3w

Spezifikationen

Advanced Features and Benefits

High Stability
Low Amplitude and Phase Noise
All-PM Solution
Single Mode-Lock State
figure 9^® Technology, Laser Output in Less than 60 Seconds
Auxiliary Output at 1560 nm
Repetition Rate 50-250 MHz

	C-Fiber 780	C-Fiber 780 HIGH POWER
Central Wavelength	780 nm ± 10nm	780 nm ± 10nm
Average Power	>100 mW	>250 mW
Pulse Energy	>1.0 nJ	>2.5 nJ
Pulse Width	<100 fs (<70 fs with FEMTOSCALE)	<100 fs (<70 fs with FEMTOSCALE)
Repetition Rate*	100 MHz (50-250 MHz with VARIO)	100 MHz (50-250 MHz with VARIO)
Repetition Rate Instability	<1 ppm over 20 hours at constant temperature	<1 ppm over 20 hours at constant temperature
Timing Jitter	<2 fs [rms, 10 kHz.. 10 MHz]	<2 fs [rms, 10 kHz.. 10 MHz]
Output Port	free space	free space
Auxiliary Output Port**	free space, 1560 nm, >250 mW	free space, 1560 nm, >500 mW
Additional Fiber-Coupled Seed Port	1 (up to 4 with MULTIBRANCH)	1 (up to 4 with MULTIBRANCH)
Polarization	linear, s-polarized	linear, s-polarized
Beam Height	75 mm	75 mm

*Please inquire for your specific combinations of average power, pulse duration and repetition rate. ** User can switch between 780 nm and 1560 nm port (arbitrary splitting ratios possible).

Beschreibung

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievments in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9^® design results in reproducible and long-term stable operation. It is based on the well-established nonlinear optical loop mirror (NOLM) mode locking mechanism. Both oscillator and amplifier use polarization maintaining (PM) fiber components only, ensuring excellent stability and low-noise operation. The subsequent second harmonic generation for the 780 nm is a highly efficient module for maximum performance.The laser is maintenance free, user installed and ready to use at the press of a single button. Customize your laser with the available options to match the requirements of your application.

Optionen

SYNC100 Repetition Rate Synchronization

Product Code: SYNC100

Tunable cavity length by high-bandwidth piezo-controlled synchronization
RRE-SYNCRO Repetition Rate Stabilization

Product Code: RRE-SYNCRO
Feedback electronics to phase lock pulses to an external clock (see product page for more details)
All-in-one synchronization solution: laser and synchronization electronics all components from one supplier: full automation for hands off operation, integrated and tested for an immediate start. → best performance with more time for your experiments!
Synchronization: Laser to reference
Relative Phase Noise between stabilized laser and 10 MHz reference:
RMS Timing Jitter: <200 fs [0.1 Hz–500 kHz] or same as reference, whichever applies first
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]

Synchronization: Laser to laser
Relative Phase Noise between two lasers in master-slave configuration
RMS Timing Jitter down to <20 fs [0.1 Hz–500 kHz] for Menlo fs lasers as master/slave with small locking bandwidth
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]
VARIO User-Defined Repetition Rate

Product Code: VARIO

Factory-set value selectable in the 50-100 MHz range
MULTIBRANCH Additional Seed Ports

Product Code: MULTIBRANCH

Seeding of multiple amplifiers with optional subsequent frequency conversion to cover multiple wavelengths
FEMTOSCALE Additional Compression Unit

Product Code: FEMTOSCALE

Compression of second harmonic output pulse length to <70 fs